EKS Série 42 Anti-vandalism



The electronic key switch EKS detects electronic keys (transponders) from a few centimetres distance. This device can replace conventional key switches or key switches with impulse function. Instead of conventional keys, transponders are used for (non-contact) activation of the EKS.

Configuration Options:

  • impulse function, 3 seconds impulse time
  • impulse function, 0.3 seconds impulse time
  • impulse function, any impulse time (relay will give impulses as long as the transponder is presented)
  • switch function
  • 1 relay (potential-free alternating contact)
  • 2 relays (potential-free alternating contacts)

The reader unit will be fixed at the rear of the inox faceplate by means of welding studs.


Data sheet

Faceplate thickness
2 – 3 mm
Fixing type
Welding studs M3x20mm
LED (configurable colors)
Power supply
12 - 30 V DC (linear rectified)
Electric current
150 mA max.
Electrical contact
2 x (NO1/NC1 + NO2/NC2)
Tensão de serviço
50 V AC / 60 V DC
Corrente de serviço
1 A
Cutting power
30 W max.
Screw terminals 0.1 - 1 mm²

You might also like

  • Register

New Account Register

Already have an account?
Log in instead Or Reset password