The electronic key switch EKS detects electronic keys (transponders) from a few centimetres distance. This device can replace conventional key switches or key switches with impulse function. Instead of conventional keys, transponders are used for (non-contact) activation of the EKS.
Configuration Options:
- impulse function, 3 seconds impulse time
- impulse function, 0.3 seconds impulse time
- impulse function, any impulse time (relay will give impulses as long as the transponder is presented)
- switch function
- 1 relay (potential-free alternating contact)
- 2 relays (potential-free alternating contacts)
EKS Série 42 square
The electronic key switch EKS detects electronic keys (transponders) from a few centimetres distance. This device can replace conventional key switches or key switches with impulse function. Instead of conventional keys, transponders are used for (non-contact) activation of the EKS.
Configuration Options:
- impulse function, 3 seconds impulse time
- impulse function, 0.3 seconds impulse time
- impulse function, any impulse time (relay will give impulses as long as the transponder is presented)
- switch function
- 1 relay (potential-free alternating contact)
- 2 relays (potential-free alternating contacts)
Options
2.2412
Data sheet
- Model
- 42
- Form
- Square
- Faceplate thickness
- 2 – 3 mm
- Fixing type
- Clip fixing
- Lighting
- LED (configurable colors)
- Power supply
- 12 - 30 V DC (linear rectified)
- Electric current
- 150 mA max.
- Electrical contact
- 2 x (NO1/NC1 + NO2/NC2)
- Operating voltage
- 50 V AC / 60 V DC
- Service current
- 1 A
- Cutting power
- 30 W max.
- Connectors
- Screw terminals 0.1 - 1 mm²
